$2.59 - $3.09
Ahi USA Sabiki Rigs are produced with only the highest quality components. All Ahi USA Sabiki Rigs include Ball Bearing and Crane Swivels designed to minimize line kinks and twist. Equipped with sharp high quality hooks, hand tied to super strong NYLON CHIP leader material, these rigs are enhanced with green glow and red flash beads. We have a selection of the most popular sizes and styles.
The Tailer helps you bring a boated fish under control quickly & safely. On a fish to be released, it is more effective than a lip gaff & it minimizes injury to fish. It is also the ideal way to control fish while you measure them for legal size & it is a big help in lifting fish as heavy as 100 lbs. into the boat. The AFTCO® Tailer is 4 ft. long with an aluminum shaft anodized in gold. 2 soft, rugged black grips are molded from the same non-slip material found on fine rods.
Make perfect haywire twists every time. Now you can wrap leader wire into clean, even twists, just like the pros with this tool.
Can't rust, won't break, never splinters, will not sink. Aluminum is harder than wood and knocks out fish faster, more surely. With thermoplastic rubber handle, flared end knob and sturdy nylon wrist cord for a firm, comfortable grip. Built to last a lifetime and if it falls overboard, it floats.
$84.00 - $154.00
The super-thick, closed-cell EVA foam back pad is engineered to maximize both comfort and leverage, so that when the belt is positioned relatively low across the thighs, the load is distributed evenly for maximum pull when fighting big fish stand-up style. Co-molded to the foam back pad is a heavy-duty, yet lightweight gold-anodized, stamped aluminum front plate. Super durable, it features posts at each side that accept unique Quick Clips, which "snap" the two piece belt straps (or optional drop straps) in place for quickly getting into or out of the belt. Also featured is a super strong, molded glass-filled nylon gimbal pocket that is engineered to quickly guide rod butts into an optimum fish fighting position. The gimbal pocket's stainless steel pin is adjustable. All fighting belts float.
Used for leadering fish, bill grabbing or handling anything slippery. Excellent tacticity and dexterity. Fully machine washable. Mesh/Direct Injection palm increases grip without retaining water. With Clarino® in the high-wear areas to increase durability and vented foam backed mesh for cool comfort and added durability.
Excellent tactility & dexterity. Machine washable. Chamude® palm adds durability. Vented foam backed mesh. Neoprene cuff adds support and a secure fit.
Specially designed for attaching to either the AFTCO T-6 Titanium or S-6. Stainless Pliers, and then connecting to the AFTCO Pliers Case, this durable vinyl, flexible coil stretches for an easy reach. Featured are two heavy duty swivel snaps for securing the pliers to the case. Pliers lanyard is sold separately.
A lethal combination for toothy fish...Unique Blood-Red leader wire snelled to Eagle Claw® saltwater series red O'Shaugnessy hooks. Blood red.
Hand sewn calfskin and elastic stay. For manual drag on spool of level wind or spinning reels. One finger, one thumb per set
Features standard muffs and yellow rangemaster adjustable temple shooting glasses. Hearing protection 23 NRR. Clam packed.
Machine washable. Stretch Kevlar over closed cell EVA protects your hands without limiting your feel. Mesh back keeps you cool and protected. Neoprene cuff adds support while Chamude palm increases durability.
$22.99 - $31.99
Raise your angling success to a higher level with NEW Titanium Tooth Proof® Leader Wire. This revolutionary new leader wire stretches and recovers to set hooks and prevent bite-offs. Special smoke-black finish hides beneath the water ready to capture Barracuda, King Mackerel, Wahoo, and other toothy game fishes. The technologically advanced Titanium alloy delivers dramatic kink resistance and flexibility. No more haywire twisting - you can tie Titanium Tooth Proof® to bait and line using the Clinch and A# right knots. (15 ft. coil)
Features a black anodized shaft that is divided in two an 8' forward section with hook, and a 4' reat section, complete w/two rugged black vinyl grips. Constructed from 6061-T6 marine grade aluminum, and is joined in the middle with a ferrule and collet nut characteristic of the Aftco Unibutt. The ferrule and collet nut "joint" is extremely strong lightweight and fully waterproof when assembled. Both the ferrule and collet nut are permanently attached to the forward section, and because the end of the ferrule accepts a vinyl butt cap, this longer 8-foot shaft can optionally be used as a stand-alone gaff. When used together, the two pieces can be separated in seconds and stored separately. Equipped with a three-inch stainless steel hook, the 3612-HB Gaff is ideal for landing king mackerel, wahoo, dolphin and tuna, as well as other medium-sized saltwater gamefish.
Includes everything needed to set up a kite fly-line for fishing one or two baits, except the Dacron® or monofilament line. Each 11-piece set includes two Goldfinger? Release Clips, three black barrel swivels, five kite hooks, and one heavy-duty snap.
The AFTCO Outrigger Clip helps you to position a trolling lure from an outrigger by simply reeling in or letting out line right through the clip, where the line rides safely on a roller that features silky-smooth action. The clip's tension adjustment is positive yet sensitive over a wide range of settings, and once the tension is set, our precision-engineered latching system releases your line repeatedly at exactly the same pull to assure fewer missed strikes and less broken line and gear.
Proven selection for Walleye, Bass & Northern Pike. Kit includes Little Cleo 2/5 oz. Fire Tiger, Rainbow Trout, yellow/red diamonds, chartreuse/green.
$14.49 - $24.99
Elastic body harness comfortably holds binoculars against the user's body. Attaches to most binoculars with quick ties. Adjustable to fit almost anyone.
Stronger, long 50" with unbreakable nylon rod caps. Easy in /out foot push bar. Anodized finish.
Eliminates knot in flyline where leader is tied. No splash when line hits water. Soft, smooth easier casting. Line does not catch when pulled through guides.
$4.39 - $39.99
Made of corrosion resistant, spring temper stainless steel. 1x7 Wire is specially stranded to deliver superior kink resistance, and the high strength of stainless makes this an excellent wire for leaders, lures, and trolling. Camouflaged brown finish minimizes reflections and disappears beneath the water. This leader comes as a spool.
$49.99 - $109.99
Premium UBE Chip Monofilament Netting, 3/8" square mesh, 80 lbs test Braille Lines and 3/4 lb. of actual lead weight per foot. 24 ft. handline is secured with a heavy-duty anodized swivel. Each net is packed in an attractive reusable hard-shelled container.
$44.99 - $54.99
Anodized aluminum rake for hunting sand fleas. Product consists of a 12" wide basket and 58" long removable handle. A 3/16" D-ring pin and nylon lanyard included to secure handle.
Adjustable drop straps (purchased separately) allow fighting belts to be attached to the Aftco Maxforce Harness.
High impact, lightweight body. Luminous dial. Ring attachment for lanyard.
$54.99 - $89.99
Reinforced web shoulder straps. Chest strap (sternum strap.) "Beak proof" black mesh fabric. Draw cord top closure.
$47.99 - $79.99
Features: Aluminum frame and extruded PVC exterior panels, key lockable latches and double layer, high-density foam.
$32.99 - $64.99
Specially stranded to provide the flexibility and resistance to bending fatigue required for use on downriggers. Wire comes with pre-rigged assemblies. The complete assembly includes a stainless steel thimble and a 225lb. stainless steel coast lock snap swivel. Ideal for fresh and saltwater use and is designed for all makes of manual and electric downriggers. Bright stainless steel.
The AMS Wave Rest provides stability for maximum arrow control while swing shooting. And more, the spinning roller provides additional arrow control during the shot and reduces wear on the arrow shaft. Allows for simple, perfect center shot adjustment & is as rugged & durable.
Ready to go after big game? Alligator, shark & stingray. Anything that will put up a big fight and gives you a chase calls for the AMS Big Game Retriever. Includes AMS Big Game Retriever Pro, Model 611 with line, wave rest, two AMS bowfishing arrows, with Muzzy quick release points and AMS safety slide system installed. big Game compact float system and On the water with AMS Bowfishing DVD.
The large ergonomic handle fits either hand safely and securely. The full length finger guard protects your fingers. Sharpening blades are Diamond Honed Tungsten Carbide for years of reliable use. AccuSharp Knife Sharpeners will not rust and can be cleaned with soap and water or in the dishwasher.
Completely waterproof and extremely durable, the kites are constructed of super-durable, ripstop, nylon sailcloth and will not rot or mildew. The kites can be used in all wind conditions from 4 to 25-plus miles an hour and feature easily adjustable Dacron® bridle and handy loops sewn into the back of the sail for attaching helium balloons for light wind use.
$4.49 - $7.49
Improved Surflon® 1x7 is a great, all-around leader wire for toothy fish. This wire is our Surfstrand® 1x7 stainless steel with a smooth coating of nylon. A specially selected grade of nylon, tough yet flexible, is used to seal out water, reduce visibility, and improve the life of the line. We added more strands to the smallest diameters, changing them from 1x3's to 1x7's. We also increased the breaking strengths of these sizes without increasing the diameters. The result is a stronger, more flexible product that is more responsive in the water. Surflon® 1x7 is an effective leader wire for hard-charging, toothy fish such as Bluefish and Mackerel. (Coil measures 30 feet in length)
$5.29 - $30.99
Ande's leader material is now available in 50 yard wrist spools. In line tests 20 through 100 pound test. Clear premium finish. 50 yard wrist spools.
Features a super-lightweight design for kites or outriggers and large diameter stainless wire bail which results in less line wear and smoother releases. The OC-1 Outrigger release clip should be attached directly to the outrigger halyard without the use of swivels. The adjustment-slider end of the clip needs to be up towards the tip of the outrigger. For fixed position bait trolling, the fishing line should be twisted 5 to 10 times before hooking the loop over the bail. The line may also be passed over the bail without twists to allow for adjustment of baits or lures.
Ready-made leaders rigged on Blood-Red nylon coated 1X7 stainless steel Surflon® wire with Duo Lock Snaps. Double crimped for extra strength.
The lycra polyester covered bio-foam shoulder and back-band padding (with synthetic terry cloth liners) connected with ventilated mesh distribute the load comfortably across the back of the angler, and allow the shoulders and upper body to carry the load during extended light to medium-tackle fights with stubborn gamefish. The four stainless steel ladder-locks are easily adjustable for the perfect fit, even when under load, and the pure brass cross-lock clips provide a secure attachment to reel harness lugs. All of the nylon webbing straps are cross and box-stitched at the critical locations for extreme durability. Included is a mesh bag with grommets for rinsing the harness with fresh water and for easy storage. Otherwise, the AFTCO Shoulder Harness is completely synthetic and machine washable.
Super-lightweight design for downriggers and large diameter stainless wire bail which results in less line wear and smoother releases.
For fighting big game fish stand-up style, the AFTCO Maxforce? is the ultimate in harness design for 30-130lb tackle. The combination of lumbar and sit-in pads distributes the load below the hips, allowing the lower body to exert maximum pulling leverage with superb comfort under heavy drag loads. Harness features a super-comfort molded, closed-cell EVA foam padding, with a tough, waterproof lycra polyester cover. The harness liner is made from synthetic terry cloth, which not only wicks moisture, but has enough "tooth" to keep the harness from slipping around and chafing. Attached to the inside liner is a name and ID tag. Harness includes both stainless "cross lock" snaps and "quick release" hooks for securing harness to reel lugs. The self-adjusting reel attachment straps prevent the harness from riding up, and provide the best pulling angle for maximum leverage. Stainless D-rings for drop straps are double-sewn and cross-stitched into the harness, and a molded rubber safety/grab handle is also double-stainless riveted and box-stitched into the back of the belt. All of the ultra heavy duty nylon web straps feature top quality, corrosion proof, "quick-release" nylon buckles or adjusters. Included is a mesh bag with hanging grommets for easy rinsing and storage of the Maxforce harness.
$109.99 - $129.99
Features special thick-walled, super strong, yet leigh weight E-glass handle construction, custom designed for extreme strength and rigidity. all of our fiberglass handles are rolled on proprietary mandrels using specific tapers developed by AFTCO, and are fitted in our factory with the same stainless steel hook in our popular Taper-Tip aluminum gaffs.
Ball shaped compass works at any angle. Safety pin type attachment. Luminous dial.
$13.49 - $13.99
The full length finger guard protects your fingers. Sharpening blades are Diamond Honed Tungsten Carbide for years of reliable use. AccuSharp Knife Sharpeners will not rust and can be cleaned with soap and water or in the dishwasher.
Mounts easily to cutting boards, filet boards, you name it. Diamond Honed Tungsten Carbide sharpening blades are double reversible and will give you an excellent sharpening finish for 8 to 10 years. A durable ABS plastic body together with stainless steel screws make it ideal for indoor or outdoor use.
High grade industrial tungsten carbide replacement blades for the Accusharp knife sharpener. Due to the unique design, blades can be reversed for double life.
$5.69 - $6.39
This two-step knife sharpener features pre-angled coarse and fine ceramic rods that will maintain an accurate edge. This sharpener is lightweight and features a rubber molded grip and feet for safety as well as a lanyard hole that allows for easy attachment to string or cord. 2 5/8" x 2 3/8".
Page 1 of 2 Next page