Fish finder accessories
XM 920MSI T ?MEGA SI, MEGA DI, DualBeam PLUS Transducerfor Helix MEGA SI Units
Depth/Speed/Temp. Frequency: 50/200 kHz. RMS Power: 600W.
The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 0.5" to 1" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt.
$27.99 - $69.99
0182-0592: T-connector. For use with red NMEA network. Works with: NMEA 2000 Compliant Units. 0182-0595: Power cable. Comes with a T connector. For use with red NMEA network. Works with: NMEA 2000 Compliant Units.0182-0596:2' extension cable. For use with red NMEA network. Works with: NMEA 2000 Compliant Units. 0182-0597:15' extension cable. For use with red NMEA network. Works with: NMEA 2000 Compliant Units. 0182-0598:25' extension cable. For use with red NMEA network. Make sure all descriptions apply.
$40.99 - $94.99
Ethernet cables can be used in conjunction with the Broadband Sounder or the Navico Expansion Port to share picture-like images between units.
$79.99 - $109.99
0182-1005: 83/200 kHz transom-mount with built in temp sensor. 0182-0710: 83/200 kHz trolling motor mount or shoot thru hull pod transducer with remote temp sensor.
The new Scotty Universal Sounder Mount uses a new multi pattern universal top plate and the patented Scotty post mount design for quick removal and infinitely adjustable rotation. Simply fasten your sounder bracket to the top plate, then lock down the sounder mount into your favorite Scotty mounting system. Locked, loaded and ready to start catching fish!
Fits tops of Johnny Ray swivel mounts JR300, JR400, JR500.
Ethernet Cable. Measures 10 Feet. Quickly Setup An Ethernet. Connection Between Two Ethernet Capable Units.
The Sounder operates at depths up to 1,000 feet. The DSI signal features a maximum depth capability of 350 feet. This unit is compatible with Broadband Sounder sonar of HDS. It also has a removable mounting neck.Includes a stainless steel ratchet system for transom mount. It works with Lowrance Scupper Mount and Lowrance HDI Trolling Motor Adapter.
10' 9 pin Xducer extension cable
$28.99 - $319.99
This hardware kit allows you to mount your XNT transducer to your trolling motor rather than the transom.
Power Cable replacements for all Humminbird fishfinders, radios, and GPS equipment have a connector at one end and soldered bare leads for connection to the power source at the other. Power connection should be made to the boat's fuse panel or through an inline fuse holder (not included on most cables) if made directly to the battery.
For Skimmer transducer. Plastic bracket adapts HS-WS transducer to trolling motor.
CA-2: 8' adapter cable lets you operate the unit from any vehicle's cigarette lighter that provides 5-16 volts. May also be used along with the AC-CAF to power unit from homes 110 outlet.
Mount System for Humminbird Helix 9, 10, & 12 Units
The RAM-107 consists of a double socket arm, one 2.5" diameter round base and connecting Humminbird/Apelco marine base. The mount is designed with a 1.5" diameter patented rubber ball and socket system that has adjustment points at the cradle base and bottom base. With a twist of the arm knob, you can move the marine mount to your optimum viewing position.
24 position automatic locking top. Patented lever-release top removal feature. Heavy duty design for today's biggest electronics. Molded from DuPont nylon and assembled with stainless steel springs and screws.
$20.99 - $409.99
$79.99 - $154.99
Transom transducers mount on the transom (back) of the boat in contact with the surface of the water. Many models incorporate an impact release feature that allows the transducer to pivot up and out of the way if struck by an object. 20 ft of cable and hardware included. 0190-2087:dual beam, 200 KHz/83 kHz, 20 ft cable. For Use With: 200DX, PRO ANGLER, PRO ANGLER 160, NS25, TRACKER PRO 128, TFX100ID, TFXIDD, XTREME 160, HDR600. 0190-2086:Transom Mount Tri/QuadraBeam Transducer with built in Temperature Sensor. For Use With: Matrix 35, Matrix 37. 0190-2088: Transom mount tri-beam transducer, 20 ft cable. This transducer is used with plastic mounting bracket. Used with the WIDE OPTIC, WIDE PORTRAIT, WIDE PANORAMA, WIDE PARAMOUNT, TOUR SERIES, 300TX, 400TX. 0190-2075: High-speed transom mount transducer, 200 kHz, 20 ft cable, modular connector, 24° cone angle, high speed hardware. For Use With: WIDE 100, WIDE 128, 100SX, 105SX, 405SX, 405SX Plus, Pro Angler 400SX. 0190-2074: High-speed transom mount transducer, 200 kHz, 20 ft cable, modular connector, 16° cone angle, high-speed hardware. For Use With: LCR400, LCR400 ID, HDR 200I, HDR 600I, LCR 100I, LCR 100G, OEM-LCR, SR ID-600, ULTIMA, HBL201G, LCR-W, WIDE W, PLATINUM ID 600, TCR ID 10, TFX100ID. Used as a secondary transducer to extend depth range on WIDE 3D PARAMOUNT. check description
Lowrance's transducer adapter cable adapts a six pin uniplug unit to seven pin Lowrance transducers. The adapter allows you to customize your fishing electronics for whatever situation you need on the water. This cable works with Eagle units as well.
Preserve your phone's battery, and keep it protected and always accessible, with the Deeper Winter Smartphone Case for Ice Fishing. It's the ideal ice fishing gear for smart ice anglers.
Trolling motor-mount, 20° pod style with built in temp sensor (200 kHz). 0182-1006:Trolling motor-mount or shoot-thru-hull, pod type transducer.
The Transducer works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI . The mount is replacement DSI Skimmer mount.
This is the 1" ball version made for light use. Extremely easy to remove your device from this quick release mount. Use these instead of the Lowrance bracket to attach to a 1" RAM mounting system. The RAM adapter base includes a 1" diameter rubber ball and inserts directly to the back of Lowrance Elite-4 and Mark-4 Fishfinders. You can also choose a clip-in quick release bracket with a 1-1/2" ball.
Page 1 of 3 Next page